Magnavox MDV422 owner manual Lpcm Output

LPCM Output 41

If you connected the DVD Player to a Stereo using the COAXIAL jack as shown on page 15, you may need to adjust LPCM OUTPUT.

Discs are recorded in a certain sampling rate. The higher the sampling rate, the better the sound quality. Some Discs are recorded in a high sampling rate of 96 kHz. Set LPCM OUTPUT to 96K if you are playing Discs recorded at this high rate. Otherwise, set LPCM OUTPUT to 48K.

1 Press SYSTEM MENU.

Press 2 to select the AUDIO SETUP PAGE icon at the top	1,6
2 of the menu. Press OK or 4.
3 Press 4 to select DIGITAL AUDIO SETUP, then press OK.	2-5
4 Press 4 to select LPCM OUTPUT, then press 2.

5 Press 3 or 4 to select 48K or 96K, then press OK. Your selection will be highlighted in brown.

6 Press SYSTEM MENU to remove the menus.