Magnavox MDV456/17 owner manual Progressive Scan

E6170UD_EN_QX4_1217 12/17/04 5:44 PM Page 42

42 Progressive Scan

You may adjust the Progressive Scan compatibility.

1 Follow the steps 1-3 in the Display SETUP SECTION on page 40.

2	● Press K or L to select PROGRESSIVE, then press
	OK repeatedly to turn PROGRESSIVE ON or OFF. The
	default setting is OFF. Choose ON if your TV has

Progressive Scan and if the TV is connected to the Player’s COMPONENT VIDEO OUT jacks. Choose OFF otherwise.

DISPLAY
TV ASPECT	4:3 LETTERBOX
STILL MODE	AUTO
PROGRESSIVE	OFF
OK

PROGRESSIVE

3 Press SETUP to remove the menu.

● If PROGRESSIVE is ON, this message appears:

Before proceeding…

1.Make sure your TV has progressive scan.

2.Connect with component video cable

NOTE: If there is no picture or picture is distorted after selecting ‘YES’,

Wait about 15 seconds for auto recovery.

Activate Progressive?	NO
SELECT: K / L SET:OK	YES

Press K or L to make a selection, then press OK. If you select NO, the menu disappears and PROGRESSIVE is OFF. If you select YES, this appears:

Confirm again to use progressive scan.

If Picture is good, Select ‘YES’.

2,3

3

Helpful Hints

• You can set PROGRESSIVE to

OFF either in the DISPLAY

menu or by pressing and

holding PLAY B on the front

of the Player for more than 5

seconds.

• When PROGRESSIVE is ON,

SELECT: K / L SET:OK

NO

YES

no video is available through

the Player’s VIDEO OUT and

S-VIDEO OUT jacks.

Confirm your setting, then press OK. The menu will disappear and PROGRESSIVE will be ON.

If you do not press any buttons for 15 seconds, Progressive Scan will switch to OFF.

• You can adjust PROGRESSIVE

in the QUICK SETUP menu

that appears when you first

press SETUP.With QUICK

selected, press OK. Press L to

select PROGRESSIVE. Press

OK to choose OFF or ON.

Press SETUP to remove the

menu