E6170UD_EN_QX4_1217 12/17/04 5:44 PM Page 50
50 Helpful Hints
The DVD Player has no power.
•Make sure the power cord is connected completely to an AC (alternating current) outlet.
•Press
The remote control will not operate the DVD Player.
•Aim the remote control directly at the DVD Player’s remote sensor. Details are on page 8.
•Remove all obstacles between the remote control and the DVD Player.
•Inspect and/or replace the batteries in the remote control. Details are on page 8.
•Use the remote control within 23 feet of the DVD Player.
No picture
• Set PROGRESSIVE correctly.Turn it on only if your TV has Progressive Scan and you are using the ComponentVideo connections between the Player and the TV. Disable Progressive Scan for all other connections. Details are on pages 9, 13, and 42.
•Connect the video cable correctly. Connect either the yellow video cable (supplied), an optional
•Set the TV to the correct Video channel (AUX IN,A/V IN,Auxiliary In, EXT or External In, Component Video In,
•Insert a playable Disc. Details are on page 7.
Disc cannot be played.
•Insert a playable Disc. Details are on page 7.
•Place the Disc correctly in the recesses in the Disc tray. If the Disc is
•Clean the Disc. Details are on page 49.
•Check the Parental controls and adjust if necessary. Details are on pages
No sound
•Connect the supplied audio cables firmly. Make sure the cables are connected to the right and left AUDIO IN jacks on the TV, Stereo, or RF modulator. Details are on pages
•Check the Audio Settings of the DVD Player. Details are on page 43.
•Turn on the power of the Stereo or TV and make sure it is set to the correct Audio In channel or “sound source,” usually Auxiliary IN. Refer to the owner’s manual of the audio equipment for details.
•Check the Audio Settings of the Disc. For example, you may have selected “soundtrack” on a DVD. Details are on page 32.
Distorted picture
•Connect the DVD Player directly to the TV. Details are on page 9.
•There are some cases where the picture may be distorted slightly and briefly; this is not a malfunction of the Player.
•Set PROGRESSIVE correctly.Turn it on only if your TV has Progressive Scan and you are using the Component Video connections between the Player and the TV. Disable Progressive Scan for all other connections. Details are on pages 9, 13, and 42.
•If your TV is not PAL compatible, DVDs recorded in the PAL color system may play only in black and white, the picture may roll continuously, or the picture may appear distorted.
You cannot adjust DVD features such as the camera angle or audio and subtitle languages.
• The DVD might not contain the feature. Check the DVD Disc menu or the Disc case for details on availability.
An “X” appears on the TV screen, prohibiting an operation.
•You cannot access the current feature at the current time or the feature is not available on the Disc. For example, some menus or features can be accessed or changed only when Disc playback is stopped, while some are available only during playback. Check the instructions for accessing the feature before trying again. Or, check the Disc to see if the feature is available first. Details are on page 6.
The DVD Player turns off after 30 minutes.
•If AUTO POWER OFF is activated, the Player turns off if playback stops for more than 30 minutes and you press no buttons on the remote or the Player.When you receive the Player, the factory has set AUTO POWER OFF to ON. Details are on page 46.
A large DVD logo appears on the TV screen.
•The DVD logo will appear on the TV screen when you stop Disc playback.The logo may dim after several minutes of no Disc activity.The logo will appear on the screen for 30 minutes, then the Player will turn off as described above.To prevent damage to your TV’s picture tube, avoid leaving the DVD logo on the TV screen. Turn off the DVD Player when it is not in use. A prolonged still image, including TV station identification logos or video games, may damage your TV picture tube.
