Magnavox VRA651AT owner manual Display Panel

22 Display Panel

VCR Display Panel	Remote Sensor
Information about VCR operations appears	Receives a signal from your remote control so
here. Different information appears at different	you can operate your VCR from a distance.
times. The display is brighter when the VCR	Press the VCR button on the remote control
power is on. The display dims automatically	before pressing other VCR operation buttons.
when you turn off the VCR power.

Cassette Compartment						TIMER Light
						This light appears when a
Insert a tape here.
						timer recording is pro-
						grammed or is in
19∝m Hi-Fi				REW	FF	progress. Details are on
	STILL/PAUSE		STOP/EJECT			pages 34-39. This light
POWER					PLAY	blinks rapidly if the VCR
SmartPicture		/OK	REC/OTR			is turned off to set a
		VCR/TV
VIDEO	L AUDIO R	CH	MENU/EXIT	CH		Timer Recording but a
		SP
		VCR
						tape is not in the VCR.
						The light also may flash if
						a Timer Recording is set
						but the clock is not set.

		SP SLP
			VCR
	Operation indicators			Clock/Counter/Channel Display
These indicators tell you the				Each time you press the EXIT/STATUS button,
current operation of the VCR.				information on the display panel will change.
3: Play, Forward and Reverse				When tape playback is stopped, press the
	Searching			EXIT/STATUS button repeatedly to see: the cur-
				rent time (when the clock is set); the real-time
\: Record
				counter; and the current channel number. During
\I: Record Pause
				tape playback, press the EXIT/STATUS button
3I: Still Picture
				repeatedly to see the real-time counter or the
Tape Speed Lights
				current time.
This light indicates the current				If a dash (-) appears to the right of the clock when
				the VCR power is off, Child Lock is activated.
tape speed. This VCR will play
				Details are on page 49.
tapes recorded in LP speed, but
				Line Input Mode
LP will not appear on the display
				When L-F appears on the display panel, you have
panel. This VCR will not record in
				selected A/V IN FRONT. Your audio and video
LP speed. Details are on pages 37
				cables should be connected to the AUDIO/VIDEO
and 52.
				jacks on the front of the VCR if you are dubbing tapes.
VCR Light				When L-1 appears here, you have selected A/V IN
This light appears when the VCR is				REAR. Your audio and video cables should be con-
				nected to the AUDIO/VIDEO jacks on the back of
in VCR position.
				the VCR if you are dubbing tapes.
Cassette-Inside Light				To select A/V IN FRONT or A/V IN REAR, press
This light appears when a tape is in the VCR. It				0,0, then press the CH(annel) 8/9 button so that
				A/V IN FRONT or A/V IN REAR appears on the
blinks when a tape is being ejected. This light blinks
				screen briefly.
rapidly if the VCR is turned off to set a Timer
				To exit Line Input mode, press the Number buttons or
Recording but there is not a tape in the VCR.
				the CH(annel) 8/9 button to select another channel.