Magnavox VRA651AT owner manual Setting the Remote Control to Operate a TV, TV Codes

26 Setting the Remote Control to Operate a TV

Your VCR remote control may operate your TV. Follow these steps to set the remote control code.

1

Point the remote control at your TV. Press the TV but- ton, then press the POWER button. If your TV turns on or off, try the CH(annel) 8/9 button. If your remote control oper- ates the TV, you’re finished. If your TV doesn’t turn on or off, or if the CH(annel) 8/9 button doesn’t work, go to step 2.

2

Find the brand of your TV on the list below, and remem- ber the two-digit number beside it.

TV CODES

EMERSON	. . . . . .14	RCA	. . .10
LG (GOLDSTAR) . .	. . . . . 04	SAMSUNG	. . .18
HITACHI	. . . . . .12	SANYO	. . .11
JVC	. . . . . .05	SHARP	. . .16
MAGNAVOX	01, 02, 03	SONY	. . .09
MITSUBISHI	. . . . . .13	TOSHIBA	. . .08
PANASONIC	. . .07, 17	ZENITH	06, 15
PHILIPS	. . . . . .01

PHILIPS MAGNAVOX . . . . . .

. . . . . . . . . . . . . . . .01, 02, 03

3

While you press and hold the TV button, press two Number buttons to enter the two-digit code for your TV. For example, if you have a Zenith TV, press Number buttons 1, 5. Then, still holding the TV button, press the STOP 9 but- ton. Your TV may turn on or off automatically.

4

Repeat step 1.

If the remote control works your TV, you’re finished. If the remote control still doesn’t work your TV, repeat steps 2-3, using a different code for your brand (if available).

2 Find the code for your TV.

1,4

	CBL / DBS		TV		VCR
	VCR/TV		POWER		EJECT
	QUICK PROGRAMMING
	1	+	2	+	3
3	START	.............	STOP	.............	DATE
	4	-	5	-	6
	DBS		DAILY		WEEKLY
	7		8		9
	SPEED		0		CLEAR
		STILL/SLOW
	...-		........ +
	REW				FF
			PLAY
					/OK
			STOP
	VOL		MENU		CH
		EXIT/STATUS
			TIMER
	SKIP SEARCH		INDEX		AUDIO/MUTE
	SMARTPICTURE				REC /OTR

Helpful Hints

•If you had to program the remote control to operate your TV, whenev- er you replace the batteries in the remote control, you will have to pro- gram the remote control again.

•There is no guarantee that the remote control will work your TV.

•The remote control may only oper- ate some features of your TV.