Magnavox VRA651AT owner manual Index Search, Press the VCR button

42 Index Search

When you make a recording, the VCR automatically places an index code at the beginning of the recording. Essentially, an index code is a type of “bookmark” for your tape. This feature is useful if you have several different programs recorded on a single tape.

Fast forward or rewind to the next or previous index code on the tape by following the steps below.

1

Press the VCR button.

2

Make sure the VCR is in VCR position. (The VCR light will appear on the display panel when the VCR is in VCR position.) If the

VCR light does not appear, press the VCR/TV button once.

3

Insert a tape in the VCR.

4

Press the INDEX ¢ button to fast forward to the next index code on the tape. Or, press the INDEX 4 button to rewind to the previous index code on the tape. Wait for the VCR to fast forward or rewind the tape. When the index code is reached, tape playback will begin automatically.

NOTE: You may press an INDEX button repeatedly to skip over multiple recordings. For example, if you want to fast forward past four recordings, press the INDEX ¢ button four times. INDEX 4 will appear in the bottom right corner of the screen. The index codes will count down on the screen as the search progresses.

(ON SCREEN MODE can not be set to OFF. Details are on page 25.)

3 Insert a tape.

						1
	CBL / DBS		TV			VCR
2	VCR/TV		POWER		EJECT
	QUICK PROGRAMMING
	1	+	2	+		3
	START	.............	STOP	.............	DATE
	4	-	5	-		6
	DBS		DAILY		WEEKLY
	7		8			9
	SPEED		0		CLEAR
		STILL/SLOW				+
	- .		........
	.......
	REW					FF
			PLAY
						/OK
			STOP
	VOL		MENU			CH
		EXIT/STATUS
			TIMER
	SKIP SEARCH		INDEX			AUDIO/MUTE	4
	SMARTPICTURE					REC /OTR

Helpful Hints

•To stop an Index Search that is in progress, press the STOP 9 button.

•The VCR does not place an index code at the point where a recording is paused, then resumed.

•INDEX may flash on the screen

briefly when you begin a recording.