Magnavox VRA651AT owner manual FF /OK button, Press the EXIT/STATUS button. Program WAS COM

Timer Recording with the VCR Plus+ Programming System (cont’d) 35

5

Press the FF :/OK button. If the VCR PLUS+ and CABLE/TV channel lists appear on the screen, the CABLE/TV channel has not been set for the VCR PLUS+ channel of the program you have set in step 4. Press the Number buttons to enter the CABLE/TV channel number from your list on page 32, then press the

FF :/OK button.

6

•If you want to record the program one time only, go to step 7. You also may press the Number 8/DAILY or Number 9/WEEKLY button repeatedly to select a ONE TIME PROGRAM.

•If you want to record the program daily, press the Number 8/DAILY button so that DAILY PROGRAM appears at the top of the screen. The VCR will record a program every day from Monday through Friday, starting at the same time and recording for the same length of time.

•If you want to record the program every week, press the Number 9/WEEKLY button so that WEEKLY PRO- GRAM appears at the top of the screen. The VCR will record a program on the same day, at the same time, for the same length of time every week.

DAILY PROGRAM (MON-FRI)

PROGRAM	1
CHANNEL +/– 12
START +/–	08:00	PM
STOP +/–	10:00	PM
REC SPEED	SLP
DATE +/–	07/31/99

SATURDAY

SET DAILY=8 OR WEEKLY=9

TO END PUSH EXIT

7

Press the SPEED button to select the tape speed. The selected tape speed, SP or SLP, will appear beside REC SPEED.

8

Press the EXIT/STATUS button. PROGRAM WAS COM-

PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING should appear on the screen. (If PROGRAM NOT COMPLETED appears, begin again from step 1.) After five seconds, the on- screen display will disappear.

9

Press the POWER button to turn off the VCR. The VCR must be turned off for a timer recording to take place.

The r light will appear on the display panel. The r light and the Cassette-Inside light will flash when you turn off the VCR if there is not a tape in the VCR.

Turn off the VCR for a timer recording! Put a tape

in the VCR. Leave the Cable Box/DBS on.

	CBL / DBS		TV		VCR
9	VCR/TV		POWER		EJECT
	QUICK PROGRAMMING
	1	+	2	+	3
	START	.............	STOP	.............	DATE
	4	-	5	-	6	6
	DBS		DAILY		WEEKLY
7	7		8		9
	SPEED		0		CLEAR
		STILL/SLOW
	...-		........ +
	REW				FF
			PLAY			5
8					/OK
			STOP
	VOL		MENU		CH
		EXIT/STATUS
			TIMER
	SKIP SEARCH		INDEX		AUDIO/MUTE
	SMARTPICTURE				REC /OTR

Helpful Hints

•Do not select DAILY at step 6 if the VCR Plus+ recording you chose is on a Saturday or Sunday. The recording will not occur, even though the VCR may accept the way you pro- grammed the recording.

•To exit the VCR Plus+ programming system at any step, press the EXIT/STATUS button.

•PROGRAM NOT COMPLETED/ CLASH may appear on the screen for five seconds at step 8 if the timer recording you programmed overlaps another timer recording. To cancel the overlapping timer record- ing, follow the steps on page 39.

•If you want to check your timer recordings, follow the steps on page

39.