Automatic Operation Features 51
Automatic Playback
When you put a tape in the VCR, the power will come on auto- matically. If the tape’s record tab is missing, playback will begin.
Automatic Rewind
When a tape is played, fast forwarded, or recorded to its end, the VCR will rewind the tape to the beginning, then stop. The VCR will not rewind the tape if the end of the tape is reached during a
Memory Rewind, Power Off
When the POWER button is pressed while the VCR is rewinding a tape, REWIND→POWER OFF will appear on the screen. When the tape has finished rewinding, the VCR will stop, then turn itself off.
Tape Eject
A tape can be ejected with the VCR power on or off (but the VCR must be plugged in).
If a timer recording is programmed, the r and
Counter Reset
The
To reset the
Automatic Tracking Adjustment
The VCR continually adjusts tracking to give you the best possible picture quality. With some recordings, however, you may get a better picture by adjusting the tracking manually (see below).
Manual Tracking Adjustment
•Press the CH(annel) 8/9 buttons to remove jitter in a still picture.
•To return to Automatic Tracking Adjustment, press the CH(annel)
8/9 buttons on the VCR at the same time except during still picture mode.
•The CH(annel) 8/9 buttons adjust tracking during normal tape play- back and slow motion picture.
•The VCR returns to Automatic Tracking Adjustment whenever a tape is inserted.
Before | After |
Tracking | Tracking |
Adjustment | Adjustment |
