Rerecording (Tape Duplication) 41

The instructions on this page show you how to copy tapes. The illustration uses two VRA651 VCRs. Different VCRs may operate differently. To duplicate a tape, make the connections shown, then follow steps 1-6. (You may use the AUDIO and VIDEO In jacks on the front of VCR 2 instead if you prefer.)

VCR 1

Playing VCR

IN

OUT

ANT.IN

 

R

 

AUDIO

 

 

 

L

 

VIDEO

 

RF OUT

 

 

CH3 CH4

 

 

1)Use audio cables to connect the AUDIO OUT Jacks on VCR 1 to the AUDIO IN Jacks on VCR 2.

VCR 2

3) Use an RF coaxial cable to connect the RF OUT

Recording VCR

Jack on VCR 2 to the TV’s ANTENNA IN Jack.

IN OUT ANT.IN

R

AUDIO

L

RF OUT

VIDEO

CH3 CH4

audio cables

2) Use a video cable to

connect the VIDEO OUT

 

 

Jack on VCR 1 to the

video cable

VIDEO IN Jack on VCR 2.

1

VCR 1 will play your tape. Insert a prerecorded tape in VCR

1.If the tape does not have a record tab, playback begins. If this happens, press the STOP/EJECT button on VCR 1 once.

2

VCR 2 will record your tape. Insert a blank tape in VCR 2.

Make sure the VCR power is on and the VCR is in VCR position. (The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.)

3

Turn on the TV; set it to channel 3 or 4, whichever channel the CH3/CH4 switch on VCR 2 is set to.

4

Point the remote control at VCR 2. Press the VCR but- ton, then press the Number buttons 0, 0. Press the CH(annel) 8/9 button so that A/V IN FRONT or A/V IN REAR appears on the screen.

5

Point the remote control at VCR 2. Press the SPEED but- ton to select SP or SLP.

6

Press the PLAY button on VCR 1 and the REC(ord)/OTR button on VCR 2 at the same time. The \ light will appear

on the VCR 2 display panel.

Helpful Hints

Unauthorized recording of copyright- ed television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws.

If a program has copy guard protec- tion, it may not record clearly.

Audio and video cables are not included.

The VCR in the figure above is the VRA651. If you have the VRA451, use a single-plug (monaural) audio cable to connect the AUDIO OUT Jack on VCR 1 to the AUDIO IN Jack on VCR 2.

To stop copying tapes, press the STOP/EJECT button on VCR 2, then press the STOP/EJECT button on VCR 1.

If you connect the audio and video cables to the AUDIO/VIDEO In jacks on the front of VCR 2, you must select A/V IN FRONT at step 4. If you connect the audio and video cables to the AUDIO/VIDEO IN jacks on the back of VCR 2, you must select A/V IN REAR at step 4.

Page 41
Image 41
Magnavox VRA651AT owner manual Rerecording Tape Duplication, VCR 1 will play your tape. Insert a prerecorded tape in VCR