Recording One Channel/Watching Another | Magnavox VRC602M guide

Hookups With a Cable Box/Direct Broadcast System (cont’d) 9

With this connection:

●You may watch one channel while recording another.

●You may not record scrambled channels.

1VCR

2	Cable Box/DBS
	75
	ANT /
	CABLE

Cable

Signal

RF coaxial cable

Connections

RF coaxial cable

3 TV’s ANTENNA

IN Jack

1

Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

2

Use the supplied black RF coaxial cable to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS.

3

Use a second RF coaxial cable (not supplied) to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.

Recording One Channel/Watching Another

1

Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Set the TV to the Cable Box/DBS output channel (03 or 04).

Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CH(annel) o/p buttons to select the channel you want to record at the VCR. Start the recording.

2

Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.)

3

Select the channel you want to watch at the Cable Box/DBS.

Helpful Hint

•When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).

Image 9

Magnavox VRC602M Hookups With a Cable Box/Direct Broadcast System cont’d, Recording One Channel/Watching Another

Contents

VCR For Customer Use Warranty Verification Safety Precautions FeaturesIntroduction Declaration of Conformity Table of Contents Battery Safety Putting Batteries in the Remote ControlUsing the Remote Control VCR maintenance Disconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast System Hookups Without a Cable Box/Direct Broadcast System cont’d Plug in the power cords of the TV and the VCR Hookups With a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Hookups With a Cable Box/Direct Broadcast System cont’d Hookups with a Stereo TV Press the Menu button. The display shown below will appear Turning on Your VCR Press the VCR button, then press the Menu button Automatic Channel Setup Adding/Deleting Channels Automatic Channel Setup cont’d Press the STATUS/EXIT button once or twice to exit Reviewing Memorized Channels Enter a 0 before a single-digit number Setting the Clock Press the VCR button, then press the Menu button Daylight-Savings Time Language Selection 2TV code Find your Setting the Remote to Operate a TV 2code Find your Cable BOX Codes Remote Control Buttons TV Button CHannel o/p Buttons If you select Status ON, then select Counter only on On-Screen Status DisplaysIf you select Status ON, then select Counter only OFF If you select Status OFF Cassette Compartment VCR Display PanelRECord Light VCR Light Front Panel Rear Panel VHS Quasi Play Back Sqpb Playing Insert a tape with its record tab intact in the VCR Recording Recording One Channel/Watching Another One-Touch Recording Daily Timer Recording Timer Recording cont’d Tape Speeds Timer Recording cont’d Checking or Cancelling Timer Recordings Rerecording Tape Duplication Repeat Play Press the PLAY/o button or the STOP/p button to selectPress the F.FWD/B button so that on appears beside Clear button to reset the real-time counter to zero Real-Time Counter MemoryWhile the status display is on the screen, press Press the VCR button, then press the Time Search but- ton Time Search Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still Picture Automatic Operation Features Understanding On-Screen Displays Multi-Channel Television Sound System Multi-Channel Television Sound System cont’d Please see additional notes on Hi-Fi Stereo Sound System Blue Background Helpful Hints Helpful Hints cont’d Renewed Glossary / Specifications SpecificationsGlossary Automatic Index Supplied Accessories