Magnavox ZV427MG9 A owner manual Other Operations

VCR FUNCTIONS

Time Search Other Operations

Introduction

This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point.

Press [VCR] first.

1)Press [SEARCH] repeatedly so that “TIME SEARCH” menu appears.

2)Using [the Number buttons], enter your desired time to skip within 30 seconds.

You can set the time up to 9:59.

TIME SEARCH 2:50

3)Press [E], [D] to start time search.

If you want to go in the forward direction, press [D].

If you want to go in the reverse direction, press [E].

After time search, the unit will play back the cassette tape automatically.

Note

•Index search and time search are not available during recording.

•Press [STOP C] to stop the search.

•If the end of the cassette tape is reached during search, this unit will cancel the search and rewind the cassette tape.

•This function is available only when the unit is connected by the VIDEO OUT jack.

Press [VCR] first.

Fast forward:

When the unit is in stop mode, press [D] to fast forward the cassette tape.

Rewind:

When the unit is in stop mode, press [E] to rewind the cassette tape.

To cue or review picture during playback (picture search):

Press [E], [D] during playback.

Press it again and the unit will search in super high speed. (in the SLP mode only)

To freeze the picture on TV screen during playback (still mode):

Press [PAUSE F]. Each time you press the button, the picture will be forwarded by one frame.

If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing [TRACKING/] on remote control.

If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped.

Counter reset:

Press [CLEAR] to reset the counter to “0:00:00”.

To playback in slow motion:

Press [PAUSE F] during playback, then press [D]. Press [D] or [E] repeatedly to select the desired speed.

Automatic rewind:

When a cassette tape is played back or fast forwarded to its end, the cassette tape will rewind to the beginning, stop and eject itself.

When you playback a cassette tape recorded in Hi-Fi stereo:

Press [AUDIO] on the remote control to select Hi-Fi or MONO for playback sound mode.

•If you have connected a stereo TV to this unit, select “HIFI”.

•If you have connected a monaural TV to this unit, select “MONO”.

Your Selection	HIFI		MONO
Type of recorded tape	L-channel	R-channel
non Hi-Fi tapes	Monaural	Monaural	Monaural
Hi-Fi tapes
recorded in	L	R	L+R
Hi-Fi stereo
Hi-Fi tapes	Main audio	Main audio	Main audio
recorded main
	program	program	program
audio program
Hi-Fi tapes	Second audio	Second audio	Second audio
recorded second
	program	program	program
audio program

Note

•Still/slow mode will stop after 5 minutes to prevent damage to the cassette tape and the video head.

•To return to playback from the picture search/still/ slow mode, press [PLAY B].

Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español

EN 85