SATELLITE LINK

8

Press [OK].

“To Standby Mode” is highlighted.

9Press [OK] again.

Satellite Link

DVD

Start VCR Mode

5:00PM DVD SP (2Hr)

To Standby Mode

In a second, the unit will be turned off automatically as it goes into the satellite link standby mode.

To cancel the satellite link function while in the satellite link standby mode:

Press [TIMER SET] to turn on the unit.

To cancel the satellite link function while the satellite link recording is in progress:

Press [STOP C] on the front panel to stop the disc recording.

Press [STOP C/EJECT A] on the front panel to stop the cassette tape recording.

Notes

If the signal of external input breaks up over 5 seconds, satellite link function will be canceled.

If you have not set the clock, “Clock Setting” menu will appear at step 4. Follow to step 3 in “SETTING THE CLOCK” on page 26.

You cannot set the ending time for the satellite link timer recording on this unit.

Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.

You can record the satellite link by using S-video input jacks on the rear panel. Refer to page 17 for more information.

When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.

Press [TIMER] during the satellite link timer recording to check the satellite link timer recording in progress.

example 1

timer recording

satellite link

actual recording

The first 2 minutes (at the longest) will be cut off.

example 2

timer recording

satellite link

actual recording

example 3

timer recording

satellite link

actual recording

The first 2 minutes (at the longest) will be cut off.

36 EN

Page 38
Image 38
Magnavox ZV427MG9 A Satellite Link, Press OK again, To Standby Mode is highlighted, Press Timer SET to turn on the unit