FUNCTIONAL OVERVIEW

Rear Panel

12

Introduction Connections

1.AC Power Cord

Connect to a standard AC outlet to supply power to this unit.

Unplug this cord from the AC outlet to completely shut down the unit.

2.HDMI OUT jack

Use an HDMI cable to connect to a display with an HDMI compatible port.

3.AUDIO OUT jacks

Use to connect a TV monitor, AV receiver or other device with an RCA audio cable.

4.VIDEO OUT jack

Use to connect a TV monitor, AV receiver or other device with an RCA video cable.

5.VIDEO IN jack (L1)

Use to connect external device with an RCA video cable.

6.AUDIO IN jacks (L1)

Use to connect external device with an RCA audio cable.

7.S-VIDEO IN jack (L1)

Use to connect the S-video output of external device with an S-video cable.

10 3 9 8 7 6 5 4 3

8.COMPONENT VIDEO OUT jacks

Use to connect a TV monitor with component video inputs with a component video cable.

9.S-VIDEO OUT jack

Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable.

10.COAXIAL DIGITAL AUDIO OUT jack

Use to connect an AV receiver, Dolby Digital decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable.

Note

Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.

This unit does not have the RF modulator.

Caution on using S-video, component, or HDMI connection for VCR:

Only the playback video/audio are available with these connections.

EN 11

Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español

Page 13
Image 13
Magnavox ZV427MG9 A owner manual Functional Overview, Rear Panel, 10 3 9 8 7 6 5 4, Introduction Connections