Magnavox ZV427MG9 A owner manual Press Stop C to exit the title list

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

4Press [REC] to start recording.“I” will be displayed for 4 seconds.

I SP(2Hr) 2h00m

Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC] again to restart recording.

5 Press [STOP C] to stop recording. The recorded title will appear in the title list. (Refer to “Guide to a Title List” on page 60.) e.g.) DVD+R

Please finalize the disc when the writing is completed before playing back on other DVD players.

Writing to Disc 90%

To set one-touch timer recording (OTR)...

This is a simple way to set the recording time in blocks of 30 minutes.

Press [REC] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen. One-touch timer recording will start.

I0h30m

0h30m

(normal recording) 1h00m

6h00m 5h30m

1	SP(2Hr)
NOV/21/09 11:00AM L1 SP
NOV/21/09	0:20:44
2
EMPTY TITLE
1:41:17 SP(2Hr)

• Press [STOP C] to exit the title list.

To change the recording length during the one-touch timer recording:

Press [REC] repeatedly until the desired length appear.

To cancel the one-touch timer recording within the specified time:

Press [STOP C].

Note

•When you press [REC], recording starts immediately and continues until the disc is full or you stop recording.

•This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•You cannot change the recording mode during the recording pause mode.

•You can change a channel (external input) to be recorded during the recording pause mode.

Note for one-touch timer recording

•The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen.

•Unlike the timer recording, you can perform the following operations during one-touch timer recording.

-Turning the power to standby to stop one-touch timer recording.

-Using [REC] or [STOP C] on the remote control.

•You cannot use the pause function during one-touch timer recording.

•When one-touch timer recording is finished and the power is turned to standby, the unit will switch to the timer- standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer- standby mode to use the unit continuously.

30 EN