Makita BDA341/BDA351 dimensions Circuit diagram, Wiring diagram

Circuit diagram	P 8/ 8
Fig. D-1

When connecting Lead wires of Brush holder complete to Switch, connect them as follows. * Lead wire (black) to M2 Terminal

* Lead wire (red) to M1 Terminal

Terminal Switch

	Connector of
	Switch
Connector of	Switch lever side
LED circuit

Color index of lead wires' sheath

Black

White

Red

Brush holder complete

FET

LED circuit

Wiring diagram

Fig. D-2

Wiring of LED Circuit

(before setting Switch and other electrical Parts)

Lead wires of LED Circuit has to be guided in Housing set (L) as illustrated below, and fix them with Lead wire holders.

Lead wire holders

LED circuit has to be put into Housing set (L) as illustrated below.

Connector of LED circuit is connected with

Connector of Switch in the next step.

Fig. D-3

Wiring after setting Switch and other electrical parts

Put the extra portion of Lead wires in this place.

Fix the Lead wires of Connectors with these Lead wire holders.

Connector of

Switch side

Connector of

LED side

FET	Heat sink	Brush holder complete
		Armature
	Yoke unit

Terminal

Switch

Lead wire holders

Put the extra portion of Lead wires in this place.

Fix Lead wires of Brush holder complete with these Lead wire holders. And put the Lead wires of Brush holder complete in the position illustrated above, expanding them between York unit and Brush holder complete.