P 11/ 13
Wiring diagram
[1] Wiring Around Controller
Fig. 29
rib (A)
Route the lead wires from Switch unit (for rotation reverse) between rib (A) and rib (C).
rib (B) | Switch |
|
Route the lead wires from Switch unit (for Trigger) between rib (B) and rib (C).
Route the lead wires (orange, white, blue) from Controller to Stator between the two pins.
pin
Place Connectors and the sag of lead wires in the space between ribs (A)- (B)- (C) and pins- rib (D)- boss.
rib (C)
Put the lead wires from Controller to Buzzer on the groove in Controller.
groove
rib (D)
Connector
boss
Controller
| Put Connector and the lead |
| wires from Controller to |
Buzzer | Buzzer between the ribs |
on Controller. |
circuit
Connector
rib
Terminal
Install Receptacles on | Receptacles |
Terminal as illustrated | Lead wire (black) |
to right. | Lead wire (red) |
| |
| Terminal |
