Makita BFL401F, BFL400F Necessary Repair Tools, Lubrication And Adhesive, Seal Lubricant No

P 2 / 13

Repair

Warning: Always be sure to disconnect battery cartridge from the machine before starting repair. Note: See the instruction manual for safety instructions, safety rules and operating instructions.

	-- Contents --
[1]	Necessary Repair Tools	III - 1
[2]	Grease and Adhesive	III - 1
[3]	Disassembling/ Assembling	III - 2

[3]	-1. Disassembling/ Assembling of Job Light Section		III - 2, 3
[3]	-2. Disassembling/ Assembling of Bearing Retainer		III - 3
[3]	-3. Disassembling/ Assembling/ Adjustment of Angle Head Section		III - 3, 4
[3]	-4.	Disassembling/ Assembling of Clutch Case Section	III - 4, 5
[3]	-5.	Disassembling/ Assembling of Clutch Section	III - 5
[3]	-6.	Disassembling/ Assembling of Gear Case Section	III - 5 -7
[3]	-7.	Disassembling/ Assembling of Switch Section	III - 7, 8

[1] NECESSARY REPAIR TOOLS

(Code No.)	(Tool Name)	(Code No.)	(Tool Name)
1R004	Retaining Ring Pliers ST-2	1R223	Torque Wrench Shaft 20-90N.m
1R005	Retaining Ring Pliers RT-2N	1R269	Bearing Extractor
1R006	Retaining Ring Pliers RT-2E	1R291	Retaining Ring S and R Pliers
1R008	Tips for Retaining Ring Pliers	1R341	Spanner Head
1R033	Bearing setting Plate 10.2	134844-7	Socket 27-50 Ass'y
1R219	Torque Wrench Shaft 7-23N.m	134848-9	Socket 27-50 Ass'y
1R220	Ratchet Head 9.5	765025-8	Torque Adjust Tool
1R222	Socket Adapter

[2] LUBRICATION AND ADHESIVE

See the parts breakdown below.

Apply 2.0g of Makita Grease N. No.2 to the portions designated with the mark of .

Apply Makita seal lubricant to the portions designated with the mark of .

Apply Loc-Tite 603 to the portions designated with the mark of .

Fig. 1

10 21 22

31

39 40		48	51	52	53
	43	45

63

64

The portions to lubricate with Makita		The portions to lubricate with Makita Grease N No.2
Seal Lubricant No. 101		48.	Three gear shafts of Carrier Complete (A)
10.	Gear room of Angle Head Complete	51.	Spur Gear 13	(3 pcs)
21.	Pin 3 (5 pcs)	52.	Spur Gear 20	Complete
22.	Teeth of Spur Gear 14	53.	Spur Gear 15	(3 pcs)
31.	Hole on Spur Gear 21	The portions to apply Loc-Tite 603
39.	Threads on Spindle
		36.	Threaded portion of Bearing Retainer 15-26
40.	Steel Ball 5.0 (3 pcs)

43.Steel Ball 4 (3 pcs)

45.steel ball 3 (13 pcs)

63.O Ring 15