P 17/ 17
Wiring diagram
Fig. D-3
Lead Unit
Pass the Lead wires of Lead unit through Polyethylene tube illustrated below.
Polyethylene Tube
for connecting to Switch
Connector | for connecting to Terminal block |
Fig. D-4
Handle
The Lead wires have to be tightened in this area.
Connector of
Lead unit
Put the following Lead wires of Lead unit into Sponge sheet.
* Lead wire (black) for connecting to Switch * Lead wire (black) for connecting to Terminal
block
* Lead wire (white) for connecting to Switch
Sponge sheet
Terminal block
Lead unit’s Lead wires bundled with Polyethylene tube has to put under Terminal block.
Boss
Polyethylene 
tube 
Lead unit’s Lead wires
Lead unit’s Lead wires have to be put on both side of Boss, And connect them to Switch and Terminal.
