ENGLISH (Original instructions)
SPECIFICATIONS
| Model | HR2300 | HR2310T | HR2600 | HR2601 | HR2610 | HR2610T | HR2611F | HR2611FT |
| Concrete | 23 mm |
|
| 26 mm |
|
| ||
| Core bit | 68 mm | 68 mm |
| 68 mm |
| |||
Capacities | Diamond core bit (dry type) | 70 mm | 80 mm |
| 80 mm |
| |||
| Steel | 13 mm | 13 mm |
| 13 mm |
| |||
| Wood | 32 mm | 32 mm |
| 32 mm |
| |||
No load speed |
|
|
| 0 - 1,200 |
|
|
| ||
Blows per minute |
|
|
| 0 - 4,600 |
|
|
| ||
Overall length | 356 mm | 380 mm |
| 361 mm |
| 385 mm | 361 mm | 385 mm | |
| Net weight | 2.7 kg | 2.9 kg | 2.8 kg | 2.9 kg | 2.8 kg | 2.9 kg | 2.9 kg | 3.0 kg |
| Safety class |
|
|
|
| /II |
|
|
|
•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
•Specifications may differ from country to country.
•Weight according to
Symbols
The following show the symbols used for the equipment. Be sure that you understand their meaning before use. 
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in brick, concrete and stone.
It is also suitable for drilling without impact in wood, metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of the same voltage as indicated on the nameplate, and can only be operated on
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
Work area safety
1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
Electrical safety
4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
2
