Makita UB1102, UB1103 dimensions Fan Section

P 3/ 8

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-2. Fan Section

DISASSEMBLING

Disassemble Fan 110 as drawn in Fig. 2.

Fig. 2

	Nozzle
1. Remove Nozzle.

3.Unscrew five 4x18 Tapping screws and remove Fan cover.

Fan cover

2. Remove Set plate by prying it off with a small slotted screwdriver.

Set plate

Fan cover

4.Remove M5-8 Hex nut by turning it counterclockwise with an impact driver while holding Fan 110 firmly with a gloved hand.

5.Remove Flat washer 5, Fan 110 and Flat washer 8.

M5-8 Hex nut

Fan 110 Flat washer 5

Flat washer 8

ASSEMBLING

Assemble Fan Section by reversing the disassembly procedure. Refer to Fig. 2.

Note: Align the hole on Set plate with the protrusion on Fan cover, and insert Set plate by hand, then push it with a small screwdriver until it stops.

Refer to the drawing on the top right in Fig. 2.