P 5/ 8
Repair
[3]DISASSEMBLY/ASSEMBLY
[3]-3. Motor Section (cont.)
DISASSEMBLING
(4)Disassemble Field as drawn in Fig. 5.
Fig. 5
1.Unscrew four 4x18 Tapping screws and remove Handle cover.
Handle cover
2. Disconnect Field lead wires from Switch.
Switch
Field lead wire
3.Disconnect Ring terminals from Brush holders with a Slotted screwdriver.
4.Unscrew two 5x40 Tapping screws and remove Field from Motor housing.
Ring terminal
Note:
Tapping the edge of Motor housing with a plastic hammer enables Field to be removed easily.
Field
Field
