Attaching/Removing the Lens
Attaching | Removing |
1.Remove the camera's lens opening cap, just like you would remove a lens, by pushing the lens release button “A” backward and then turn the lens cap or the lens itself counter clockwise and lift out.
While pushing the lens release button “A”, rotate
the lens counter clockwise until it stops and lift it
off.
To remove the front lens cap, squeeze the shiny sections together and lift out.
To remove rear lens cap turn it counter clockwise.
*After removing the lens from the camera body, protect both ends by attaching the caps.
*Oil, dust, fingerprints or water on the electronic contacts could result in malfunction or corrosion. Wipe such impurities off with a clean piece of cloth.
2. Attaching the lens
Align the red alignment dot of the lens (on the shiny flange) with the camera's red dot, fit the lens into the camera and rotate it clockwise until it clicks into place.
*Do not touch the distance ring or other
rotating parts during the auto focus
operation.
15 | 16 |
