Mamiya 211125, 645 AF manual Removing a partially exposed film roll, Exposure film

Removing a partially exposed film roll

To remove partially exposed film roll, insert the dark slide in the magazine and press the shutter button and the forced film advance button “A” simultaneously. This causes the film to be taken up till the end and the magazine's LCD panel shows "End".

6-exposure film

If you continue photographing after the 8th exposure when using 6-exposure film, the shutter membrane may be damaged by the leader paper at the film end or by the film's sticker. Use the procedure described below.

Photograph in the same way as with 120 film. Eight exposures can be taken. After taking the 8th exposure, insert the dark slide in the magazine,

then half-press the shutter release button while pressing in the forced film advance button to wind up the film.

This camera is equipped with a TTL phase difference detection type auto focus function. When the brightness or contrast is low and it is difficult to focus, a supplemental infrared light is emitted automatically. Set the focus mode selector lever to "S" (single focus mode) or "C" (continuous focus mode).

29 30