Attaching the Roll Film Holder
*Remove the Roll Film Holder Cover.
1.While spanning the Roll Film Holder between your thumb and middle fin- ger, holding it on the rubberized fin- ger rests, carefully align its Film Holder Mounting Bracket with the corresponding center clip of the camera body.
2.While keeping this alignment, press the upper part of the Roll Film Holder against the camera body, so that it clicks into place by engaging the spring loaded twin camera catch.
Removing the Roll Film Holder
1.Insert the Dark slide into the slot marked by White Lines on the side of the holder.
2.Push the lower one of the Film Holder Detaching Lock Release Button (A) downward, while simulta- neously pushing the Film Holder Detaching Button @I inward.
*If the Dark Slide is not inserted, the safety lock will prevent the holder from being removed.
*The Dark Slide can be inserted in the Roll Film Holder up to the Green Line, marked on the slide, without affecting the image.
Green Line
11
