![](/images/new-backgrounds/1130412/13041229x1.webp)
Inserting the Battery The camera will not function without a battery | Checking Battery |
|
The camera will not function with- out a battery
With your fingernail, pull the Battery Chamber Cover latch, on the bottom of the camera body, as indicated by the arrow in the illustration. Lift the cover off. The camera requires a 6V alkaline, silver oxide or lithium bat- tery. It is a good idea to wipe the battery terminals before insertion to assure proper contact. Observe po-
larity. + position is marked in battery cavity. InserttheOsidefirstatasteep angle and then push entire battery into place, making sure that the lift ribbon wraps around battery. Close cover by inserting
*Be particularly careful not to let the lift ribbon cover theOterminal.
Press Battery Check Button “B.C.”
(A)on lower front of the camera. Battery Check Lamp (B) on top op- posite side should light. Bright light indicates good condition. Blinking light means replace battery. No light means battery is dead or improperly inserted.
14