![](/images/new-backgrounds/1130412/13041235x1.webp)
1.Attach the Roll Film Holder to the camera body.
2.Pull out the Dark Slide and place it into its Storage Slot.
3.Set the Shutter Speed Dial to any other position than ”A” or ”AEL”. When the AE Prism Finder is not mounted on the camera, the shutter will not release if the Shutter Speed Dial is in the “A” or“AEL”position.
4.Set the Multiple Expo- sure Lever on the body to the “MULTI” position.
____~~~
5.Set the Shutter Release Selector to “0”(normal mode), and press the Shut- ter Release Button.
6.After the shutter has been released, advance the Film Advance Crank one com- plete revolution and the next frame will be ready.
*When only the body is tested, the familiarization checkout can be made either in the “MULTI” or 0 (normal mode).
The empty film spool included with the film holder is supplied with a vinyl tube. When placed in the
17