Manhattan Computer Products PLAZA HD-52 manual Watching NON-FREESAT Channels, By pressing or

TUNING IN NON-FREESAT CHANNELS (continued)

The Plaza HD•S2 will take a few seconds to complete a Manual Scan and about five minutes to finish an Auto Scan. While it is scanning, the receiver displays the number of TV and radio channels found so far. When it is finished, the receiver will display a list of all the channels found.

You can choose to watch a non-Freesat channel from this list by moving the orange bar using the and buttons to highlight the channel you want and pressing , or return to watching TV

by pressing or .

WATCHING NON-FREESAT CHANNELS

Non-Freesat channels and Freesat channels are stored separately in the receiver but you can switch between them quite easily. When you are watching a non-Freesat channel, the information 36

bar displays the Manhattan logo instead of the Freesat logo.

While watching a non-Freesat channel, you can step through the other non-Freesat channels by pressing the or buttons.

You can also switch directly to the channel you want using the number buttons. All the non-Freesat channel numbers have four digits. If you enter only the three digits of a Freesat channel, the receiver will switch to that Freesat channel.

HINT: Non-Freesat TV channels are stored from channel number 3001 and non-Freesat radio channels from 4001.

While watching a Freesat channel you cannot enter a four-digit channel number to switch to a non-Freesat channel, but you can

press the button to switch to the channel you last watched,