Manhattan Computer Products ST 250 instruction manual Example To configure four antennas

EXAMPLE: To configure four antennas

Astra 2 (28.2E), select Antenna 1 and set DiSEqC to 1 Astra 1 (19.2E) select Antenna 2 and set DiSEqC to 2 Hotbird 1-6 (13E), select Antenna 3 and set DiSEqC to 3 Thor 2, 3 (1W), select Antenna 4 and set DiSEqC to 4

EXAMPLE: To configure MONOBLOCK LNB

Astra 1(19.2E), select Antenna 1 and set DiSEqC to Mini-AHotbird 1-6(13E), select Antenna 2 and set DiSEqC to Mini-

B

12V: To select 12 volts output for relay type LNB switch.

STORE: After above settings move to store and press OK key

CONFIGURING DiSEqC ANTENNA POSITIONER

DiSEqC 1.2 menu (Manual positioner)

With DiSEqC 1.2 antenna positioner, you can search and download individual satellites with manual positioning.

In Channel Search menu go to Positioner and select DiSEqC 1.2 and press OK key. A sub menu will appear.

Move: Move antenna furthest possible East or West and enter the limits below.

East Limit: After furthest East enter the limit here

West Limit: After furthest West enter the limit here

Erase Limits: To clear limits press OK

0 Position: To move to 0 (centre) position on motor.

Re-sync:If you need to re-sync satellite positions, first find one satellite then move down to ‘Re-sync’ and press OK.

STORE: After above settings move to store and press OK key

DiSEqC USALS menu (Automatic Positioner)

You can search and download up to 40 satellites at a time automatically using the DiSEqC USALS menu.

In channel search menu go to Positioner and select DiSEqC USALS and press OK key. A sub menu will appear.

Longitude: Enter your location using 0-9 keys and then PAGE up / down keys to enter E (East) or W (West).

Latitude: Enter your location using 0-9 keys and then PAGE up / down keys to

enter N (North) or S (South). EXAMPLE: London – Longitude = 0 and Latitude = 51.5N

USALS: Press OK to move antenna automatically to required satellite.

0 Position: To move to 0 (centre) position on motor

STORE: After above settings move to store and press OK key

CHANNEL SEARCH -- Automatic Scan and Search

Using DiSEqC USALS menu you can search and download up to 40 satellites automatically at a time. Follow settings below.

Search Index: Set index numbers for each satellite you wish to search.

Antenna: If you are using more than one LNB, select antenna reference as configured previously. If you are using one LNB then this may remain as 1. Satellite: Press OK and select satellite name. Remember that you have to select a different name for each index number.

Search Mode: Select search option for each satellite. See below for options. Options with + D will also include data channels

 Auto All - All TP, Video and Radio channels automatically.

 Auto All + D -All TP, Video, Radio and Data channels automatically.  Auto FTA - All TP for Free To Air Video and Radio channels automatically

 NIT All – All TP, Video and Radio channels with Network Identification Table automatically

 NIT All + D – All TP, Video, Radio and Data channels with Network Identification Table automatically.  NIT FTA --All TP for Free to Air Video and Radio channels with Network Identification Table

automatically.

 TP All --Selected TP for all Video and Radio channels. To select move to TP Data and press OK for sub menu.

7