RF SETUP
qw
er
t
qIR Enabled
Select this radio button when device control is performed by IR operation.
wRF Enabled
Select this radio button when device control is performed by RF operation using the RX3001.
eChannel
The RF channel can be selected here. Use this to select the same setting as the RX3001.
rGroup ID
The RF ID can be set here. Setting different group IDs enables independent control under the same system of two devices that use the same remote commands.
tBuilt-in IR Blaster
Use the radio button to enable or disable the
Note:
When editing the RC2001 settings, although RF Enabled and other settings can be selected in the editing software, RF Enabled and other settings are automatically disabled after downloading a file to the RC2001.
14
