![](/images/new-backgrounds/1121686/12168617x1.webp)
LEARN IR
1. Use a USB cable to connect the PC making the settings to the remote controller (RC3001/ RC2001).
2. Place the remote controller so that its infrared signal transmitter is facing the infrared signal receiver on the remote controller at a distance of about 2 inches (0.05 m).
3. Click the “Learn IR” icon in “Add IR Code Window”.
4. This enters the learning standby mode. Send the remote controller code that you want to learn.
5. Learning is complete when “LEARN OK” is displayed in Results.
7