ADD IR CODE WINDOW

y

q

t

w

e

r

qLearn IR

This is used to learn the remote control codes from other remote controllers and set them in the action list. (Refer to page 7, Learning IR.)

wMy Database

This loads and sets the IR codes registered in My Database. Specify the file saved in the PC to load the IR codes registered in My Database.

eIR Database

This loads and sets the IR codes from the IR Database containing the remote codes from various brands. (Refer to page 8, IR Database Window.)

rRC5/6

This uses direct key input to set the remote control codes RC-5, RC-5 Extension, RC-6 mode 0, RC-6 mode 6A used by Marantz. (Refer to page 9, Edit RC5/RC6 Window (Direct Input Code.)

tTest IR

This performs a test transmission of IR commands by sending a preset code from the remote controller connected to the PC.

yDuration

This is used to adjust the duration of the IR command.

6

Page 8
Image 8
Marantz 3 manual ADD IR Code Window