WIZZ.IT 3 OPERATION

After Wizz.it 3 is installed, the Wizz.it 3 icon is displayed on the PC desktop. Double-clicking the icon starts Wizz.it 3.

To make settings for the remote controller after startup, either edit the default configuration file or use a new configuration file.

ICON DESCRIPTIONS

q w e r t y u i o !0 !1 !2 !3 !4 !5 !6 !7 !8

qNew Configuration

This creates a new setting configuration.

wOpen Configuration

This opens a setting file saved in the PC.

eSave Configuration

This saves the configuration that is being edited as a user file to the PC.

rDownload to remote control

This writes the edited configuration to the remote controller.

tUpload from remote control

This loads remote controller settings to the PC.

yUndo

This is used to undo an edit operation in the settings.

uRedo

This is used to redo an edit operation in the settings that were undone.

iCut

This cuts a selected setting.

oCopy

This copies a selected setting.

!0 Paste

This pastes a selected setting.

!1 Delete

This deletes a selected setting.

!2 Label

This is used to set the label of a selected device or button.

!3 Properties

This is used to set the properties of a selected device or button.

!4 Add new device

This adds a new device.

!5 Add new page

This adds a new page.

!6 Wizz. it Simulator

This simulates on the PC the remote controller that was set.

!7 Clock Sync

This synchronizes the internal clock of the remote controller with the internal clock of the PC.

!8 Help

The User Manual is displayed as a PDF file.

3

Page 5
Image 5
Marantz 3 manual Icon Descriptions