Marantz 541110153029M, Dv4003 manual Hdmi Setup, Default setting Auto

•

ENGLISH

6

Before You

Start

Connecting Up Control & Displays Getting Started Playing Discs

DVD Setup

Menu

InformationAdditional

DVD Setup Menu

Note

•When the player is set to YCbCr, some TV may not properly synchronise with the player on the A/V EURO connector.

HDMI SETUP

This feature is only applicable if you have connected this DVD system to a HDMI- compatible TV/device.

This setting can be toggled on and off by pressing the HDMI button for three seconds or more. HDMI is on when the unit is shipped from the factory.

Note

•This unit supports HDMI Ver. 1.0.

•This unit does not support HDMI control functions (CEC).

WIDE SCREEN FORMAT

•Default setting: OFF

Selects a suitable screen display. This feature is only available if you have selected TV ASPECT – 16:9 WIDE.

•SUPER WIDE – Selects this to display a 4:3 picture disc on a wide-screen TV with non-linear stretching (the centre position of the screen is stretched less than the side).

•16:9 SQUEEZE – Selects this to display a 4:3 picture disc on a widescreen TV without stretching. Black bars will be shown on the both sides of the TV screen.

•OFF – No aspect ratio adjustment is made when this option is selected.

Note

•The WIDE SCREEN FORMAT feature will be disabled if your HDMI TV has been preset to the 480P or 576P settings.

HDMI VIDEO

•Default setting: AUTO

Selects a suitable video resolution depending on the capability of the connected TV/device to enhance the HDMI video output.

•480P/525P – Progressive output in 480 lines for NTSC TV

•576P/625P – Progressive output in 576 lines for PAL TV

•720P – (if a HDMI TV is connected) Progressive output upscaled to 720 lines

•1080i – (if a HDMI TV is connected) Interlaced output upscaled to 1080 lines

•1080P – (if a HDMI TV is connected) Progressive output upscaled to 1080 line

•AUTO – The video output will automatically follow the display’s supported resolution

Note

•If no display appears on the TV due to an unsupported resolution, use the composite video cable to connect the DVD system and your TV. Turn on your TV to the correct input channel for the composite video and adjust the resolution setting to 480P/576P.

•The resolution can also be set with the HDMI button on the remote control.

•In general, the larger the number, the higher the resolution.

•When the resolution is changed, the image may be corrupted or the output may take longer than normal.

•Pressing the HDMI button for three seconds or more toggle the HDMI on/off state.

42