Marantz 642SC11S1, SC-11S1 manual Rear Panel, Names And Functions Of Parts

I	[NAMES AND FUNCTIONS OF PARTS		]
	( REAR PANEL
			H
	@	@	ACIN
	lDaranlZ
	MODEL NO. SC·11S1

@ PHONO GND Terminal C8> AC IN Power Cable Connection Socket

Connect the grounding wire from an analog record player here.

Connect this socket to the power outlet using the included power cable.

@PHONO Input Jacks

These jacks are for connecting to an analog record player. Both MC and MM cartridges can be used, therefore set the PHONO MC button ® on the front panel according to the type of cartridge you are using.

© CD Input Jacks

These jacks are for connecting to the output jacks of a Super Audio CD player, etc.

© LINE 1/2 Input Jacks

These jacks are for connecting to the output jacks of a tuner, DVD player, etc.

CE) RECORDER 1/2 Input Jacks

These jacks are for connecting to the output jacks of a tape deck or other type of recording device.

®RECORDER 1/2 Output Jacks

These jacks are for connecting to the recording input jacks of a tape deck etc.

© PRE OUT Jacks

These jacks are for connecting to the input jacks of a power amplifier.

CD REMOTE POWER CONTROL Jack

(TRIGGER OUT)

This jack is for connecting to the TRIGGER IN jack of a Marantz SM-11 S1 stereo powered amplifier used when simultaneously switching the power of both devices ON/OFF. For more information on REMOTE POWER CONTROL, see page. 25.

Q)AMP MODE Switch

STEREO: Set to use this unit as an ordinary stereo control amplifier.

BI-AMP: Set to use this unit in complete bi-amp connection.

For more information on BI-AMP MODE, see page. 24.

®F.C.B.S. IN/OUT Jacks

These jacks are used to connect and synchronize up to four amplifiers. For instructions on use and connections, see F.C.B.S. (page. 26).

CD BALANCED PRE OUT Jacks

These jacks are for connecting to the balanced input jacks of a power amplifier.

r:0 BALANCED INPUT 1/2 Jacks

These jacks are for connecting to the balanced output jacks of a Super Audio CD player, etc.

s