Marantz SC-11S1 manual ~oo·l~, Remote Power Control, Howto Use And Set Features, ~g~F, ~~-c·····

[ HOWTO USE AND SET FEATURES

[ REMOTE POWER CONTROL

By connecting this unit to a Marantz 8M-11 81 stereo power amplifier by remote power control, the power supply of the 8M-1181 can be automatically switched ON/OFF in sync with this unit'spower ON/OFF control. There are 2 trigger output terminals on this unit, and a maximum of 2 8M-11 81s can be controlled in sync with this unit'spower ON/OFF control.

1.Prepare the correct number of double-ended mini plug audio connection cables for the number of 8M-11 81 s to be connected. Either of the following types of connection cables are adequate.

•Monaural miniplug ~ monaural miniplug connecting cable

~nrrlllllnrr!ll![]II====~\'S~====t:llIllllllnnrrlllll~

•8tereo miniplug ~ stereo miniplug connecting cable

2. Afta< completi"g the """ectio"s show" below, switch th] I

remote power control ON/OFF switch on the rear panel of the 8M-1181 to ON.

3.Press the 8M-11 81 POWER ON/OFF switch to switch to standby mode.

4.In this condition, press the POWER ON/OFF switch on this unit, and the power of the 8M-11 81 will switch ON in sync.

Notes:

•The 8M-11 81 cannot be controlled if the 8M-11 81 remote power control switch is OFF.

•When the power for this unit is switched ON or OFF, control sync signals are output from TRIGGER OUT 1 and 2.

(However, the TRIGGER OUT 2 power ON control signal is output approximately 1 second after the TRIGGER OUT 1 power On control signal output.) )

a:xo::::C:JIDlIJDlUlIlIllIIIIDII====~\\\====:[IIlIIIIIII[]JllIIIII~

Note:

Do not use connecting cables that contain resistance.

SC-11S1

TRIGGER OUT

1 2

~~

~~-c·····

SM-11S1

1

-----....

.j . . . ..

© ~g~F I

~oo'"·l~__--'

Set to ON

SM-11S1

25