6
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA

Connect

The “Simple version” section provides the speaker installation, connection, and setup methods for the 7.1-channel system with surround back speakers.

For the installing, connecting, and setup methods of speakers other than the 7.1-channel system (with surround back speakers), see page 48.

nExample of connections to Marantz MM7055 and MM7025 power ampConnecting the unbalanced PRE OUT terminalSBL SBRFL FRC
SL SR
SW
Speaker cables
(sold separately)
Audio cable
(sold separately)
Subwoofer with
built-in amplifier
GMM7055H
GMM7025H
Connecting the balanced PRE OUT terminalSBL SBRFL FRC
SL SR
SW
Speaker cables
(sold separately)
Audio cable
(sold separately)
Subwoofer with
built-in amplifier
GMM7055H
GMM7025H
GAV7005 XLR connector PIN
arrangementH
12
3
q GND (Ground)
w HOT (Hot)
e COLD (Cold)
The PIN arrangement in this device uses
the European method.
In the USA method, w is COLD, and e
is HOT.
When connecting a device that utilizes
the USA type of PIN arrangement, replace
the w and e plugs on one side of the
balanced cable.
NOTE
Do not short the HOT and GND or COLD
and GND for use.
1.AV7005U_ENG.indd 6 2010/08/23 18:32:03