96

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA

Using macro operations

[Example] Using the recorded macro operations to button “1”
1Press the MACRO.
“MACRO” is shown in the MACRO
indicator and remote control display.
2Press the number button (“1”)
that you want to use.
Macro operations recorded to number
button “1” are performed one at a time.
• The step number shown in the remote
control display disappears after the step is
performed.
• When all macro operations are completed,
the remote control returns to the amp
operation mode.

Deleting recorded macro operations

[Example] Deleting the macro operations recorded to button“2”
1Press and hold MACRO and
MENU together until “MACRO”
ashes in the LEARN indicator,
MACRO indicator and remote
control display.
2Press and hold CLR and the
number (“2”) that you want
to delete for approximately 3
seconds.
“M2-CL” flashes in the remote control
display.
3Press the ENTER.
The recorded macro operation is deleted,
and the remote control returns to step 1.
• To cancel the macro delete operation, press
a different button without pressing ENTER.
4When the macro operation delete is complete,
press and hold ENTER until the MACRO indicator
switches off.

Adjusting the interval time of macro operations

transmitting

The macro operation transmission interval can be adjusted.
• The factory setting is “1 second”.
1Press and hold MACRO and
SOURCE SEL until “SETUP”
is shown in the remote control
display.
“SETUP” is shown for 3 seconds in
the remote control display, after which
“MCR05z” is displayed.
z The current transmission interval is
shown.
2Press o p to change to the desired transmission
interval.
• The interval time can be changed from 0.5 to 5 seconds by 0.5
seconds step.
3When the adjustment is complete, press and hold
ENTER until the MACRO indicator switches off.
Operating macro function Setting the back light
Press the Light button on the side of the remote control, and the
buttons on the remote control light for 2 seconds. If the Light button
is pressed while the buttons are lit, the buttons remain lit for another
2 seconds.
• Backlight is set on in the factory settings.

nDisabling the backlight

Press and hold both SET and
STANDBY until indicator ashes
twice.

nTurning the backlight on

Press and hold both SET and ON
until indicator ashes twice.
1.AV7005U_ENG.indd 96 2010/08/23 18:33:21