78

ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Manual Setup
Setting items Setting details
Speaker Config.
(Continued)
Surround : Set the presence and size of the surround speakers.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround speakers are not connected.
• When “Surround” is set to “Large”, “S.Back”, “F.Height” and “F.Wide”
can be set to “Large”.
• When “Surround” is set to “None”, “S.Back”, “F.Height” and “F.Wide”
can automatically set to “None”.
S.Back : Set the presence, size and number of surround back speakers.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the surround back speakers are not connected.
2spkrs : Use two surround back speakers.
1spkr : Use only one surround back speaker. When you select this
setting, connect the surround back speaker to the left (L) channel.
Even when the “S.Back“ setting is other than “None”, sound may
not be emitted from the surround back speaker, depending on the
playback source.
NOTE
When “Amp Assign” setting (vpage78) is other than “Normal”, you
cannot make the “S.Back” setting.
F.Height : Set the presence and size of the front height speakers.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when the front height speakers are not connected.
NOTE
When “Amp Assign” setting (vpage78) is other than “Normal”, you
cannot make the “F.Height” setting.
Remote control operation
buttons
Move the cursor
(Up/Down/Left/Right) Confirm the setting Return to previous menu
Speaker Setup Default settings are underlined.
Perform when setting the speakers manually or when changing settings made in Audyssey Auto Setup.
• If you change the speaker settings after performing Audyssey Auto Setup, it will not be possible to select
MultEQ XT, Dynamic EQ and Dynamic Volume (vpage74, 75).
• Manual Setup can be used without changing the settings. Please set if necessary.

nAudio output from each PRE OUT terminal

PRE OUT Channel
UNBALANCED PRE
OUT terminal FL/FR C SW1/SW2 SL/SR SBL/SBR HL/HR WL/WR
BALANCED PRE
OUT terminal FL/FR C SW1/SW2 SL/SR SBL/SBR --- ---
Audio Output Front A Center
Subwoofer 1 /
Subwoofer 2
Surround Surround
Back*
Front Height /
Front B Front Wide
*The output audio differs depending on the “Amp Assign” settings.
Setting items Setting details
Amp Assign
Set the speakers connected
to the UNBALANCED and
BALANCED PRE OUT SBL/
SBR terminals of the power
amp.
Normal : Set when using surround back, front height or front wide
speakers.
ZONE2 : Set for connecting the speakers for ZONE2.
ZONE3 : Set for connecting the speakers for ZONE3.
SPKR-C : Set for connecting the tweeter of the front speaker to the
UNBALANCED and BALANCED PRE OUT SBL/SBR terminals of the
power amp, and the woofer of the front speaker to the FL/FR terminals.
Speaker Config.
Select speaker configuration
and size (bass reproduction
capability).
NOTE
Do not use the outward
shape of the speaker to
determine selection of a
“Large” or “Small” speaker.
Instead, use the frequencies
set in “Crossover
Frequency” (vpage80) as
the standard for determining
bass reproduction capability.
Front : Set the front speaker size.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
• When “Subwoofer” is set to “No”, “Front” is automatically set to
“Large”.
• When “Front” is set to “Small”, “Center”, “Surround“, “S.Back”,
“F.Height” and “F.Wide” can not be set to “Large”.
Center : Set the presence and size of the center speaker.
Large : Use a large speaker that can adequately play back low
frequencies.
Small : Use a small speaker that has inadequate playback capacity for
low frequencies.
None : Select when a center speaker is not connected.
“Large” is not displayed when “Front” is set to “Small”.
Subwoofer : Set the presence of a subwoofer.
Yes : Use a subwoofer.
No : Select when a subwoofer is not connected.
When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”.
1.AV7005U_ENG.indd 78 2010/08/23 18:33:13