Marantz CC4300N manual Rear Panel Controls, Functional Overview, zANALOG output jacks, xRS232C

English

Functional Overview

Rear Panel Controls

1 2

MODEL NO. CC4300 / N1B

				RS232C
				SERIAL NO.
REMOTE	DIGITAL OUT		ANALOG OUT	REMOTE CONTROL
CONTROL
SELECTOR	COAX.	OPTICAL	L	IN
EXT. INT.
			R	OUT

4 5 6 3

zANALOG output jacks

Connect these jacks to the CD(or AUX) input jacks of your amplifier or receiver.

xRS232C

The RS232C port is to be used in conjunction with an external controller to control the operation of the CD player by using an external device. (See also page 26.)

cREMOTE CONTROL IN/OUT jacks

By connecting this CD player to another Marantz audio component using a D-BUS remote control cable, you can operate the components remotely as a single system.

•When connecting to a component with a remote sensor, connect the REMOTE CONTROL IN jack of this unit to the REMOTE CONTROL OUT jack of the component with the remote sensor.

•When connecting to a component which is not equipped with a remote sensor, connect the component to the REMOTE CONTROL OUT jack of this unit.

For the D-BUS cable connection, use supplied remote control cable or a commercially available RCA-type pin lead.

•By connecting this CD player to a Marantz auto reverse cassette deck (such as the SD4050), automatic recording from the CD player to the cassette deck can be carried out.

v REMOTE CONTROL SELECTOR switch

When using this unit independently, set this switch to INTERNAL. When using this unit in a system incorporating a Marantz tuner or timer equipped with a remote sensor, set the switch to EXTERNAL.

Note :

•Always set this switch to INTERNAL unless the unit is connected with other MARANTZ equipment through a system connection. When this switch is set to EXTERNAL, the main unit cannot be controlled from the provided remote control unit.

7

bDIGITAL output (COAX.) jack

•Connect this jack to the COAXIAL DIGITAL input jack of amplifier or receiver to enjoy live digital sound.

•You can record digital sound by connecting the COAXIAL DIGITAL INPUT jack of MD deck or CDR recorder to this jack.

nDIGITAL output (OPTICAL) jack

•Connect this jack to the OPTICAL DIGITAL input jack of amplifier or receiver to enjoy live digital sound.

•You can record digital sound by connecting the OPTICAL DIGITAL INPUT jack of MD deck or CDR recorder to this jack.

•Not all of the commercially-available optical fiber cords can be used for audio equipment.

If there is an optical fiber cord which cannot be connected to your audio equipments, consult your dealer or nearest service organization.

mAC input cord

Plug this cord into a wall AC outlet or the switched AC outlet of amplifier or receiver.

6