ENGLISH
INSTALLATION
The numbers between parentheses refer to the
Digital Coaxial connections
1For recording and playing, connect coaxial cables from the CDR500 to digital equipment based on the diagram below:
CD | CDR |
DIG. | DIGITTAL |
OUT | LOOP |
| OUT |
6 | 7 |
R |
|
IN OUT
8
R |
I N P U T | I N P U T | O U T P U T | I N P U T | O U T P U T |
DAT, CD/R,etc. DAT, CD/R,etc. DAT, CD/R,etc.
Note:
-During the default playback mode (see Changer Mode, page 17), the
-You can also connect the LOOP OUT jack on the CDR500 to the coaxial digital input jack of a digital device when the DIG- ITAL (SPDIF) IN is used.
Digital Optical connections
1For recording, connect a
DIGITAL
IN
o
O U T P U T
Digital cascade connections
Cascade recording allows, via the LOOP OUT jack, multiple units to record all using the exact same digital signal. The LOOP OUT can also be used to pass a digital signal to other equipment without being processed by the CDR500.
Use the following steps to setup multiple CDR500s for record- ing from a single digital source:
1Connect the coaxial digital output of a digital source machine (CD, DAT, etc.) to the DIGITAL IN jack on the CDR500 as indiacted in step 0.
2Connect the LOOP OUT of the first CDR500 to the DIG- ITAL IN on the next CDR500 as indiacted in step !.
3Continue to conect units as indicated in step ! and @.
DIGITTAL
CD, DAT, etc.
I N P U T O U T P U T
10
DIGITTAL
LOOP
OUT
11
IN OUT
DIGITTAL
LOOP
OUT
12
IN OUT
DIGITTAL
LOOP
OUT
IN OUT
5 CDR500s max.
Note:
The LOOP OUT jacks will
DAT, CD/R,etc.
Note:
Before Connecting the cables, remove the dust caps from the digital optical connections. We recommend that you save the caps.
6
CDR500U Eng | 6 | 10/11/00, 9:31 AM |
