Marantz CDR500 Recording from Internal CD-PLAYER, Double speed recording, Three times to select

ENGLISH

RECORDING (FROM INTERNAL CD-PLAYER)

The numbers between parentheses refer to the fold-out.

SCAN

REPEAT

PROG.

RANDOM

ABC

DEF

GHI

w

w

1

2

3

JKL

MN

OPQ

4

5

6

RST

UVW

XYZ

7

8

9

DISPLAY

SPACE

SCROLL

CD RECORDER/CD PLAYER CDR500

0

CDR

PLAY MODE

CD

IR

FUNCTION

CDR

CD

Recordable

ReWritable

STORE

REC LEVEL/SELECT

r

STANDBY

ERASE REC.M

MENU

TIME

TEXT

PROG

POWER

HEADPHONE

LEVEL

		DELETE
FINAL	INPUT	CANCL

PUSH ENTER

0 10

er q w

Double speed recording

Using the internal CD-Player drive.

•During double speed recording the sound is not audible.

1Make sure that the recording disc is absolutely free of scratches and dust particles.

2To choose the type of recording, press REC MODE (10).

once: to select			if you wish to make a
fast recording of a disc or programmed tracks.
three times: to select			if you wish to make a
	fast recording of a disc or programmed tracks
	and to automatically finalize the recording.
	Also see ‘FINALIZING CD-R & CD-RW’ discs
	on page 15.
The		display starts blinking. After 3 sec-

onds the display shows the remaining CD-R/RW record- ing time on the left and total time of source on the right.

(every 2 seconds	is displayed.)
Both selection indicators are lit.

w	MENU/	CANCEL/
	STORE	DELETE
		ENTER

4To start recording press 0 (4).

➔The display shows the real remaining time for the se- lected recording. High speed recording starts.

lights continuously.

•To check the elapsed recording time, press TIME (14) or DISPLAY (77). This can be done during recording.

•Recording will stop automatically.

5To stop recording manually, press 9 STOP (5, 87).

➔ goes out and recording stops.

•If 9 STOP (5, 87) is pressed within 3 seconds after 0 (4) is pressed, no recording will take place.

• After recording, the display shows for several sec- onds. The Total time indications can differ slightly. However, no music information is lost.

Note:

- In this Recording mode, the Pause function is not operative.

Important:

If you want to play the recorded CD-R/RW disc on any regu- lar CD player, it must first be finalized. (See FINALIZING/ UNFINALIZNG page 15).

Finalized CD-RW discs play only on CD-RW compatible CD players.

There is a chance that the sound will be distorted if the recording level is set at a value that exceeds 0 dB for dig- ital sound sources and -12dB for analog sound sources. The factory settings at the time of shipping are 0 dB for digital sound sources and -12dB for analog sound sources.

3Press PROG (18 or 91) to select one or more tracks for recording (see PROGRAMMING):

-rotate the REC LEVEL/SELECT (13) key to the required track number, then press REC LEVEL/SELECT (13).

or:

-directly select the track number via the 10-keypad(76) on the remote control, then press REC LEVEL/SELECT (13).

10

CDR500U Eng 01-14 10 10/11/00, 9:31 AM