Marantz CDR500 manual Initial Setup, English, Switching ON and OFF, Inserting discs

ENGLISH

INITIAL SETUP

The numbers between parentheses refer to the fold-out.

Switching ON and OFF Inserting discs

1Plug the power cord supplied into the AC IN socket on

the CDR500, then into a AC power outlet.

MODEL NO.CDR500

MADE IN JAPAN

IN

OUT

q

2Press the POWER (1) button on the front of the CDR500 to turn it on or off.

	CD	RECORDER/CD
IR			PLAYER
				CDR500

	CDR
			PLAY	MODE
					CD
ERASE
REC.	STORE
MODE
FINAL	MENU	REC
INPUT			LEVEL/SELECT
	DELETE
	CANCL
					TIME
		PUSH		ENTER	TEXT

LEVEL

0

10

	CD RECORDER/CD PLAYER CDR500	1 Press / (28) to open the disc tray.
IR		➔	lights up.
	Recordable	2 Insert a CD, CD-R or CD-RW in the appropriate recess in
	ReWritable
		the tray, label side up.

STANDBY

POWER

ERASE

FINAL	3 Press / (28) to close the tray.
	➔	lights up, followed by	and the dis-
		play will show the type of disc you inserted.

w

Note:

When the power is switched ON, the STANDBY function on the remote control (72) allows the CDR500 to be turned OFF ex- cept for the IR receiever circuit that will wait for the standby signal to turn power back on.

Using the remote control

1Open the battery compartment cover.

2Insert 2 batteries (AA, LR-6 or UM-3; as supplied) as shown.

3 Replace the cover.

Note:

We recommend you use 2 batteries of the same type and condition.

This remote control can switch “STANDBY ON/OFF” but can- not switch “POWER ON/OFF” on the CD-Recorder.

Batteries contain chemical substances, so they should be disposed of properly.

•If a CD-R/RW is finalized it will show CD on the display.

•If CD-text is available the TITLE/ARTIST will scroll by.

Note:

The CD-Player drive is able to read un-finalized CD-R and CD- RW discs.

CD-Recorder drive only

-For recording it is important that the blank disc is completely free from dust particles or scratches. (see Compact Discs Care, page 1).

-If you insert a blank or partly-recorded CD-R/RW or an

unfinalized CD-R/RW, the CD-Recorder will calibrate the disc for optimum recording. During this process the display

will first showand then the number of audio tracks. Calibration can take up to 30 seconds.

8

CDR500U Eng 01-14 8 10/11/00, 9:31 AM