Marantz CDR500 manual y u er t, Recording, English, Manual start recording

RECORDING

The numbers between parentheses refer to the fold-out.

CD RECORDER/CD PLAYER CDR500

			CDR	PLAY MODE	CD
IR
	Recordable
	ReWritable
			STORE	REC LEVEL/SELECT
STANDBY	ERASE	REC.M	MENU		TIME	TEXT	PROG
POWER							HEADPHONE	LEVEL

		DELETE
FINAL	INPUT	CANCL

PUSH ENTER

0 10

y u er t

4 5 6

RST UVW XYZ

7 8 9

DISPLAY SPACE SCROLL

0

FUNCTION

CDRCD

u

MENU/	CANCEL/
STORE	DELETE
	ENTER

ENGLISH

Manual start recording

About AUTO TRACK and AUTO STOP

•AUTO TRACK is a function to increment track numbers either manually or automatically.

AUTO TRACK ON : track numbers will be automati- cally incremented according to the source. (See the table on page 23)

AUTO TRACK OFF : track numbers are manually incremented by pressing TRACK INCR. (73).

•When AUTO TRACK is ON, you can also set the AUTO STOP function.

AUTO STOP ON : the recording will be stopped auto- matically. (See the Table on page 23.)

AUTO STOP OFF : the recording has to be stopped manually.

1Make sure the disc is absolutely free of scratches and dust particles.

2Connect the CDR500 to an external source. (see IN- STALLATION page 5 and 6.)

3Press INPUT (9) repeatedly until the selected external source appears on the display (depending on the connec- tion used):

➔	,	or	lights up and	,
		or	appears on the display.

•If or flashes, the digital data is not being received correctly. Check all connections and settings on both the source unit and the CDR500.

5Set the optimal recording level on the CD-Recorder.

1.Play the source first to set the optimal recording level on the CD-Recorder.

2.Rotate the REC LEVEL/SELCT (13) key until, on the Record/Play Level bar, all the blue segments light but the red segments do not light continuously during the loudest passages.

DIGITAL RECORDING : +6dB ~ –63dB

ANALOG RECORDING: 0dB ~ –63dB

3.Stop the source.

•To record a 3-second silence at the start of a track, press 2/; (6) or ; (82) before starting the source.

6To start recording, press 0 (4) on the CD-Recorder and immediately start the source.

The track number and recording time left appear on the display.

•If 9 (5, 87) is pressed within 3 seconds after 0 (4), no recording will take place.

•To check the elapsed recording time, press TIME (14) or DISPLAY (77). (This can also be done during the recording.)

7To stop recording, press 9 (5, 87).

•To pause recording, press 2/; (6) or ; (82).

After recording, the display will show	for sev-
eral seconds as it finishes recording.

Note:

The recorded sound might be distorted when you adjust the recording level above 0dB for digital recording and -12dB for analog recording. The default setting of record level for digital is 0dB and analog is -12dB.

4With the recorder stopped, press REC MODE (10) five times to enter the Manual Record standby mode.

➔.

Important:

If you want to play the recorded CD-R/RW disc on any regular CD player, it must first be finalized. See finalizing discs on page 15.

Finalized CD-RW discs play only on CD-RW compatible CD players.

13

CDR500U Eng 01-14 13 10/11/00, 9:31 AM