Marantz CR401 manual About the Timer Programs, Timer Program Setting, Timer Program Examples

ENGLISH

OTHER OPERATION

TIMER PROGRAMS

7About the Timer Programs

•This unit has three timer programs so that you can turn it on and off automatically at certain times and on certain days of the week.

•Timer programs can be set for single operation (Once) or everyweek operation (Everyweek) or everyday operation (Everyday) or the days of the week operation (Weekday).

7Timer Program Setting

•You must set the clock time before you set the timer programs.

•You need to store preset stations before you set the timer programs.

1.Press the TIMER button x, “TIMER PROGRAM 1” is displayed.

6.	The display indicate “TIMER PROGRAM x
	FM/AM”. Either turn the Easy JOG 4/¢
	knob !5or press the 5 or ∞ button c, the
	display changes “TIMER PROGRAM x FM/AM”.
7.
	Press the Easy JOG 4/¢ knob !5or
	ENTER button b to select “CD”, “FM/AM”,
	“TAPE”, “MD” or “DVD”.
8.	Either turn the Easy JOG 4/¢ knob !5or
	press the 5 or ∞ button c to select Preset
	station to be programed.

10.Set the On time.

qEither turn the Easy JOG 4/¢ knob !5 or press the 5 or ∞ button c to adjust the hour for the On time and press the Easy JOG 4/¢ knob !5or ENTER button b.

w Either turn the Easy JOG 4/¢ knob !5

or press the 5 or ∞ button c to adjust the

minutes for the On time and press the

Easy JOG 4/¢ knob !5or ENTER

b

7Timer Program Examples

•The following examples highlight some of the ways in which you can use the timer programs.

Timer program 1: To wake up to your favorite radio station every morning, set as follows:

TIMER PROGRAM 1 SET → FM/AM → A1 FM 87.50MHz → EVERYDAY → ON TIME= 7:00AM → OFF TIME= 7:30AM

(If you want a radio alarm only on weekdays, select “WEEKDAY” instead of “EVERYDAY” and specify “MON-FRI”.)

Timer program 2: To listen a radio program on only this Sunday, set as follows:

TIMER PROGRAM 2 SET → FM/AM → B1 AM522kHz → ONCE → SUNDAY → ON TIME= 9:00PM → OFF TIME=10:00PM

2.The display changes as follows each time the Easy JOG 4/¢ knob !5is turned or the 5 or ∞ button c is pressed.

TIMER PROGRAM 1 TIMER PROGRAM 2

TIMER PROGRAM 3

3.Press the Easy JOG 4/¢ knob !5or ENTER button b to select timer program number.

4.The display indicate “TIMER PROGRAM x SET”.

9. Select the Operation method.

q Either turn the Easy JOG 4/¢ knob !5 or press the 5 or ∞ button c to select operation method “ONCE”, “EVERYWEEK”,

“EVERYDAY” or “WEEKDAY” .

w Press the Easy JOG 4/¢ knob !5or

ENTER button b to decide the operation.

When you select “ONCE” or “EVERYWEEK”,

button .

11. Set the Off time.

qEither turn the Easy JOG 4/¢ knob !5 or press the 5 or ∞ button c to adjust the hour for the Off time and press the Easy JOG 4/¢ knob !5or ENTER button b.

w Either turn the Easy JOG 4/¢ knob !5

or press the 5 or ∞ button c to adjust the

minutes for the Off time.

12. Set the timer program.

q Press the Easy JOG 4/¢ knob !5or

7Timer Program Overlap

•If two or three timer programs are set to the same ON TIME, the timer program with the lowest number has priority.

For example, if Timer program 1 and Timer program 2 are both set to an ON TIME of 7:00AM, Timer program 1 has priority and Timer program 2 is ignored.

Timer program 1: 7:00AM - 1:00PM (This timer has priority)

Timer program 2: 7:00AM - 0:30PM

If the setting of the two timer program overlaps, the earlier timer has priority.

Timer program 1: 9:00AM - 10:00AM

Timer program 2: 8:00AM - 10:00AM (This Timer program has priority)

Either turn the Easy JOG 4/¢ knob !5or press the 5 or ∞ button c, the display changes as follows.

TIMER PROGRAM x SET TIMER PROGRAM x CONFIRM

TIMER PROGRAM x OFF TIMER PROGRAM x ON

•If timer program is already available, to select “TIMER PROGRAM x CONFIRM” to scroll the timer setting contents.

•If timer program is already available, to select “TIMER PROGRAM x ON” to activate the timer.

•To select “TIMER PROGRAM x OFF” to turn off the timer program.

5.Press the Easy JOG 4/¢ knob !5or ENTER button b to select “TIMER PROGRAM x SET”.

you can select the day of the week by turning

the Easy JOG 4/¢ knob !5or pressing

the 5 or ∞ button c.

When you select “WEEKDAY”, use the

Easy JOG 4/¢ knob !5or pressing

the 5 or ∞ button c to select the first day,

and then press the Easy JOG 4/¢

knob !5or ENTER button b.

Use the Easy JOG 4/¢ knob !5or

pressing the 5 or ∞ button c to select the

last day.

Then press the Easy JOG 4/¢ knob

!5or ENTER button b.

ENTER button b to decide the timer

program setting.

Standby indicator lights up green and

setting contents are scrolled.

Notes

•Timer program can activate regardless of power on or standby mode.

•When timer program is finished, the unit goes to standby mode.

•When timer program is activated, standby indicator lights green.

•You can cancel the Timer program setting procedure at any time by pressing the TIMER button x.

20