Marantz CR401 manual Abnormal Behavior

Symptom	Cause	Measures	Page
Can’t play a CD?	• The disc is upside down.	• Load the disc with the label-	12
		side facing up.
	• The disc is dirty.	• Remove the disc and clean it.	3
	• Condensation has formed	• Remove the disc and leave the	2
	inside the CR401.	CR401 turned on for several
		hours until the condensation
		has evaporated.
	• The CD-R/RW disc is	• See “Disc Notes”.	2
	nonstandard.
It takes a long time to	• It may take a longer time to	• This is not a malfunction.	2
read CD/MP3.	read CD/MP3 with many track
	numbers.
It takes a long time to	• The disc is dirty.	• Remove the disc and clean it.	3
locate certain tracks.	• The disc is very scratched.	• Buy a new disc.	2
The clock is wrong?	• CT (Clock Time) information	• Set the clock by Manual	19
	has been taken from a radio	operation.
	station in another time zone.
No sound is output	• While a timed recording task is	• To hear what’s being recorded,	19
when a timed playback	in progress, the output of the	press the MUTE button to
or recording task starts?	CR401 is muted.	cancel the Mute function. Press
		it again to mute the CR401.
	• For timed playback, the	• Set the volume to a suitable	11
	volume is determined by the	level.
	VOLUME control.
Standby indicator	• The protection circuit may be	• Make sure not to short-circuit	9
flashes.	activated.	the positive and negative
		speaker wires.

Abnormal Behavior:

The CR401 contains a microcomputer for signal processing and control functions. In very rare situations, severe interference, noise from an external source, or static electricity may cause it to lockup. In the unlikely even that this should happen, unplug the power cord from the wall outlet, wait at least five seconds, and then plug it back in again.

ENGLISH

23