29
PICTURE-IN-PICTURE (PIP)
NOTES: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory. (see pages
42 and 43)
2. If a channel is tuned during this SURF scanning, sub-pictures will be removed from the screen.
3. SURF MODE PIP is allowed only when ANTA is selected as the main channel.
4. If PARENTALCONTROL MOVIE/TV RATINGS setting is ON, PIP SURF mode will be deactivated.
NOTES: 1. The SWAPbutton will only operate when SINGLE PIP mode or SPLIT PIP mode is chosen.
2. The SWAPfunction will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as
a sub-picture.)
PICTURE-IN-PICTURE CONT.
SURF MODE PIP
This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along
the right edge of the screen. Press the PIP button a second time to remove the sub-pictures from the screen.
SWAP button
If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.
ANT A 28
ANT A 10
VIDEO: 1
09
10
12
PIP MODE button
To change between the three different PIP modes (SINGLE, SPLIT, or SURF) press the PIP MODE button when PIP is ON.
Each press of this button will change PIP to a different mode. Pressing this button three times will cycle through all three
different PIP modes.
ANT A10 VIDEO: 1 VIDEO: 1 ANT A10
SINGLE
SPLIT
PIP
PIP
SWAP
SWAP
PIP MODE
ANT A 10
VIDEO: 1
PIP MODE
PIP MODE
NOTES: 1. When main channel is COMPONENT: Y-PBPRinput, only SPLIT PIP mode will be allowed. If sub-picture is changed
to a COMPONENT: Y-PBPRusing the PIPCH button, the PIP mode will automatically change to SPLIT mode.
2. SURF mode PIP is only allowed when ANTA is the main picture.
VIDEO: 1
ANT A10
ANT A 10
VIDEO: 1
ANT A 10
VIDEO: 1
ANT A 10
VIDEO: 1