Marantz M-CR610 Sleep timer function, Checking the current time, 22To cancel the sleep timer

Contents Connections Playback Settings Tips Appendix

Sleep timer function

You can have the power automatically switched to standby once a set time has elapsed. This is convenient for listening while going to sleep.

1	Press SLEEP and display the time you want to set.
	• The OFF indicator on the display lights.

• You can set the sleep timer in the range from 10 to 90 minutes in steps of 10 minutes.

22To cancel the sleep timer

Press SLEEP to set “Sleep 1 Off”.

The OFF indicator on the display turns off.

%

•The sleep timer is also cancelled when this unit is set to the standby mode.

•To check the time remaining until the sleep timer is activated, press SLEEP.

Checking the current time

22Checking the current time when the power is on

Press CLOCK.

•Press once more and the display returns to its original condition.

22Checking the current time when the power is set to standby

Press CLOCK.

•When “Network Control” (vpage 86) is set to “On”, the current time is displayed during standby.

Press CLOCK again, and the current time disappears.

•When Network Standby is set to “Off”, the current time is displayed for approximately 30 seconds, and then automatically disappears.

NOTE

•The time cannot be set when in the standby mode. Turn on the power first.

Switching the display’s brightness

1 Press DIMMER.

• The display brightness is adjusted each time DIMMER is pressed.

100% (Default) / 75% / 50% / 25% / Off

%

• If you operate the buttons when the display’s brightness is set to “Off”, the display temporarily lights at the 25% brightness level.

			76
Front panel	Rear panel	Remote		Index