Marantz M-CR610 appendix Wireless LAN, Internet, Modem, To WAN side Router with access point

Contents Connections Playback Settings Tips Appendix

Wireless LAN

Internet

Modem

To WAN side

PC

Router with access point

%

• With this unit, it is possible to use the DHCP and Auto IP functions to make the
network settings automatically.
• When using this unit with the broadband router’s DHCP function enabled, this unit
automatically performs the IP address setting and other settings.
When using this unit connected to a network with no DHCP function, make the
settings for the IP address, etc., at “Network” (vpage 86).
• When using this unit, we recommend you use a router equipped with the following
functions:
• Built-in DHCP server
This function automatically assigns IP addresses on the LAN.
• Built-in 100BASE-TX switch
When connecting multiple devices, we recommend a switching hub with a speed
of 100 Mbps or greater.
• Use only a shielded STP or ScTP LAN cable which is easily available at electronics
stores (CAT-5 or greater recommended).
• The normal shielded-type LAN cable is recommended. If	a flat-type cable or
unshielded-type cable is used, other devices could be affected	by noise.
• When using a WPS (Wi-Fi Protected Setup) compatible router, easy wireless
connection is possible by pressing this unit’s Wi-Fi CONNECT button. (See the
separate “Quick Setup Guide”.)
NOTE

zz This unit comes with a built-in Wi-Fi antenna.

• The types of routers that can be used depend on the ISP. Contact your ISP or a

computer shop for details.

• This unit is not compatible with PPPoE. A PPPoE-compatible router is required if

you have a contract for a type of line set by PPPoE.

• Do not connect an NETWORK connector directly to the LAN port/ Ethernet

connector on your computer.

			26
Front panel	Rear panel	Remote		Index