Marantz M-CR610 appendix 22iPod cannot be played back

ContentsConnectionsPlaybackSettingsTipsAppendix

22iPod cannot be played back

Symptom	Cause/Solution	Page
iPod cannot be connected.	• When using iPod by connecting it to the USB port, some iPod variations are not supported.	22
	• When iPod is connected by using a USB cable other than the genuine cable, iPod may not be	–
	recognized. Use a genuine USB cable.
The AirPlay icon ' is not displayed	• This unit and PC / iPhone / iPod touch / iPad are not connected to the same network (LAN).	25
on iTunes / iPhone / iPod touch / iPad.	Connect it to the same LAN as this unit.
	• The firmware on iTunes / iPhone / iPod touch / iPad is not compatible with AirPlay. Update the	–
	firmware to the latest version.
Audio is not output.	• The volume on iTunes / iPhone / iPod touch / iPad is set to the minimum level. The volume on	–
	iTunes / iPhone / iPod touch / iPad is linked with the volume on this unit. Set a proper volume
	level.	62
	• The AirPlay playback is not performed, or this unit is not selected. Click the AirPlay icon ' on
	the iTunes / iPhone / iPod touch / iPad screen and select this unit.
Audio is interrupted during the AirPlay	• Quit the application running in the background of the iPhone/iPod touch/iPad, and then play	–
playback on iPhone / iPod touch /	using AirPlay.
iPad.	• Some external factors may be affecting the wireless connection. Modify the network	–
	environment by taking measures such as shortening the distance from the wireless LAN
	access point.
iTunes cannot be played back through	• Enable the “Allow iTunes control from remote speakers” setting on iTunes. Then, you can	–
the remote control unit.	perform playback, pause, and skip operations through the remote control unit.

			98
Front panel	Rear panel	Remote		Index