Marantz M-CR610 appendix 22When making Wi-Fi connection, NnWPS PIN code method, NnAuto-Scan

Contents Connections Playback Settings Tips Appendix

22When making Wi-Fi connection

In this menu, Wi-Fi settings and connections can be made using any of the four connection methods.

Auto Scan / WPS(PIN) / Web Browser Setup / Manual

%

•If a LAN cable is connected, remove it.

•See the Quick Setup Guide for details on how to connect to Wi-Fi using the Wi-Fi CONNECT button on the rear panel.

nnWPS (PIN code method)

1	From the list of the networks, select the one you want
	to connect to.
	When the network you want to connect to is not detected, select
	“Rescan”.
2	Set this PIN code to the register.

nnAuto-Scan

	This automatically searches for networks.
1	From the list of the networks, select the one you want
	to connect to.
	When the network you want to connect to is not detected, select
	“Rescan”.
2	Make the following settings.

Default Key : Select the default key.

•When connecting to a “WEP” encrypted network, “Default Key” menu is displayed.

Password : Input the password.

DHCP / Proxy : Make settings for DHCP / Proxy (vpage 87).

Test Connection : Test the connection.

nnWeb Browser Setup

Use a web browser to set up Wi-Fi.

A Wi-Fi device that can perform web browse operations is required.

1	Select Web Browser Setup.
2	Press ENTER.
3	Select Wi-Fi network called “Marantz M-CR610” from
	your Wi-Fi device.
	The IP address appears on the unit.
4	See Step 4 of the Web Control function (vpage 68).

			88
Front panel	Rear panel	Remote		Index